Pre Stressed Planks

Dcon prestressed planks are reinforced with a strong and highly resilient PC Wire with the diameter of 4 mm. They are different from other general planks because they do not use an ordinary steel and a prestressed wire used in the production like others. Moreover, they are acting as a formwork in pouring the floor…

Before installing Dcon prestressed planks, the beam surface must be checked for smoothness and temporary bracing must be installed at the center of the planks length. In case of a high weight support or a plank with a length of 3.00 m, the temporary bracing is removable only when the concrete topcoat is in a…

Dcon prestressed planks are stable as they are placed next to each other without any other parts to assemble. Also, the floor side is smooth and beautiful without plastering and hitting the ceiling ,only applying mortar at the joint and drawing the groove, Furthermore, the planks can be painted over immediately and saved painting cost…

Dcon prestressed planks have a cross section like a board and the appearance of the top surface plank is rough, not smooth like the bottom surface. In order to improve the adhesion to concrete topcoat, Dcon prestressed planks have width 35 centimeters, thick 5 centimeters and length not over 5 centimeters and use 4 millimeters…

Dcon prestressed planks are produced from a standardized factory, the large factory with the largest capacity in Thailand from 1997 to present by the machines that can accurately control concrete mixes. Due to the meticulosity in setting the formwork, selecting raw materials and controlling all the production processes with the international standard quality control system…